2021.09.26 08:50 yeaiamstillnotfunny i swear people that blast actual good OST have to go to heaven
|submitted by yeaiamstillnotfunny to bloxymemes [link] [comments]|
2021.09.26 08:50 prawnbiryani 💗☁🍦🌸🧁🤍🦩
|submitted by prawnbiryani to 11hr11min [link] [comments]|
2021.09.26 08:50 newsdk Hovedmanden bag folkedrabet i Rwanda er død i fængslet
|submitted by newsdk to newsdk [link] [comments]|
2021.09.26 08:50 DarkCharizard81 good morning
2021.09.26 08:50 california_daze_ 22F
|submitted by california_daze_ to truerateme [link] [comments]|
2021.09.26 08:50 Dakinitensfox How do you get same-sex divorce abroad?
I'm a US citizen that got same-sex married in the US to a non-US citizen. We both live abroad, but have decided to get divorced. We have contractly agreed upon all the financial issues surrounding our divorce. The problem, though, is that same-sex marriage isn't recognized in the country we live in, so we cannot get a legal divorce here. I have tried to find lawyers in both countries to get a legal divorce, but cannot find anyone who will take up our case because almost all US states have residency requirements for divorce. I actually talked to one US lawyer, who advertised as LGBT-friendly, that kept referring to my now-separated husband as my "wife", making me less enthralled to seek laywers.
It is impossible to find any resources online, and I was wondering if anyone knows of any.
submitted by Dakinitensfox to GayMen [link] [comments]
2021.09.26 08:50 robble808 Parts needed to put a pole in volcano mount then dishy on pole?
I have a 30’ rohn tower with a flat top that i can bolt a volcano mount to. I wouldn’t mind another 4-6’. What size pole fots the volcano mount? Would I also need a pipe adapter?
submitted by robble808 to Starlink [link] [comments]
2021.09.26 08:50 Ok-Stomach-5569 Absolutely hate my side profile, would lipo help with the fat under my chin / cheek? Was also thinking of getting fillers for jaw and chin
2021.09.26 08:50 Practical_Platypus_2 [Advice] How do I get my welds cleaner and the finish like these examples?
|submitted by Practical_Platypus_2 to metalworking [link] [comments]|
2021.09.26 08:50 Moo_ooM88 I don't fit in with my family
After 30 years, all the insults and hurtful words come to my inclusion: I don't fit in with my family. My grandmother, mother and siblings don't think: I am pretty or smart. They said that to my face, and my feelings are hurt. My dad thinks very little of me, and even said that why can't you be like your cousin. My siblings are only nice to me, when they need a flavor like babysitting their kids. They hang out with each other without me.
I am happy: I have good teachers and friends make me feel pretty and smart. They actually want to spend time with me, and they don't insult me.
I came to accept the fact: My family thinks very little of me, and they think I am unsuccessful in my life. Conclusion I don't go to them for advice, and I will spend less time with them. Speak less and my feelings will be spare :)
submitted by Moo_ooM88 to family [link] [comments]
2021.09.26 08:50 Ethansimler Opinions on adding a snorkel??? I see the huge benefit of them, but i don’t wanna look like “that guy” with my 3rd gen.
|submitted by Ethansimler to 4Runner [link] [comments]|
2021.09.26 08:50 couponnat شركة مكياجي من الشركات الرائدة في مجال مستحضرات التجميل والمكياج والعطور، حيث استطاعت أن تتميز ليس فحسب بتقديم ما يجذب المرأة العربية، والاهتمام بجمالها. بل بأسعارها والخصومات والعروض التي تقوم بها على كافة منتجاتها، سواء مكياجي عطور أو مكياج مكياجي وغيرها من المنتجات التي تبيعها الشركة.
|submitted by couponnat to couponnatt [link] [comments]|
2021.09.26 08:50 gaspaaar_ Jaja, nooo :(
|submitted by gaspaaar_ to RedditMint [link] [comments]|
2021.09.26 08:50 Upset-Ad6898 Kratom and Seroquel?
I want to try Kratom for the first time but I currently take quetiapine every night for sleep, should I be worried about any possible interactions ?
submitted by Upset-Ad6898 to kratom [link] [comments]
2021.09.26 08:50 Lacrymaria_olor Seeking main game help/DLC
2021.09.26 08:50 brcblog Story of how the Blessed Virgin Mary got the title Madonna, Divine Shepherdess
2021.09.26 08:50 Batface_101 [PS4][Price Check][Riven]
|submitted by Batface_101 to wartrade [link] [comments]|
2021.09.26 08:50 Sandlotje SOLVED: How to prevent your ear cap from falling off, and how to fix it if it does.
Note: If your earbuds are under warranty, doing the following will probably void it.
If you want to prevent the ear cap cover from falling off, use the earwings without the tip. Using the earwings with the tips actually does too good of a job keeping the earbuds in your ear. So when you go to remove the earbud from your ear, you end up pinching the ear cap cover and pulling on it, and that cover is only held in place by a tiny piece of rubber with (what I suspect) is a barb at the end to help keep it in place. So just a tiny bit of pulling force on that little barb causes it to break almost immediately.
When using the earwings without tips, just be sure you do not pull on any part of that cap to remove the earbud from your ear. I think the way I usually remove the earbud (I've never really thought about it until now) is I just kinda roll them out without any pressure on the cap cover.
I've had my Jabra Elite Sport for over 4 years now (Feb. 2017), and they're fantastic! I never had an issue with them until this past week when I switched from the earwings without a tip to the ones that have a tip. What happened? The ear cap almost immediately came off of both ears the first time that I removed the earbuds from my ears to put them away. Coincidence? I think not. Using the earbuds with the tips definitely requires some force applied to remove the earbuds from my ears, which is great for knowing that they're nice and secure; but terrible with such a flimsy design flaw.
So if you do manage to break the ear cap cover off, you'll notice in my pictures Loctite Super Glue with Ultragel Control (there are three different types in nearly identical packages locally). You'll also notice in my second picture where I carefully placed three beads of glue. As you're squeezing the sides to get the glue to come out, you should be able to see the glue about to come out of the nozzle. Paying attention to this will help avoid too much glue coming out. The main location I placed the glue (which did not show up well at all in the picture) is a small dab in the hole where the little plastic/rubber piece with the barb that broke fits into. In the picture with the beads of glue, it is the left-most hole in that picture. The cap has a little plastic piece that fits into that hole perfectly.
Unfortunately I have no idea how long this will last. I believe it is going to last a very long time, probably longer than the original way they stayed together with that plastic/rubber barb. I wonder if my headphones will last another four years for me to have that answer... who knows.
But what I do know is that this fix feels very solid, even with the earbuds w/ the wing tips. The glue is holding incredibly well, and thanks to the precision applicator the glue only went where I put it and not into the microphone or any other places that causes problems.
I see that there are seemingly dozens of people who run into this particular issue, but I haven't found a post with a solution. So here ya go.
submitted by Sandlotje to Jabra [link] [comments]
2021.09.26 08:50 Yeetus-lord-of-memes Finished up my bladeguard squad, deciding to call them the bloodguard.
|submitted by Yeetus-lord-of-memes to BloodAngels [link] [comments]|
2021.09.26 08:50 KLASHINOV The power of sun in the palm of my hand
|submitted by KLASHINOV to PrequelMemes [link] [comments]|
2021.09.26 08:50 WorkoutBeast1985 Check me
2021.09.26 08:50 pieterpaling Meet Loki the Floofer
|submitted by pieterpaling to blackcats [link] [comments]|
2021.09.26 08:50 remvs98 Taliban krijgen waarschijnlijk geen spreektijd bij Algemene Vergadering van VN
|submitted by remvs98 to NUjijDiscussies [link] [comments]|
2021.09.26 08:50 shanabailey Drillpro 600mm Woodworking Line Scriber T-type for 31.99 USD without coupon (Best price in history: $32.89)
Here is the link (Banggood): Drillpro 600mm Woodworking Line Scriber T-type
Current price is $31.99. The lowest price in my database is $32.89 on 26.8.2021.There're already 6 records in DB. Price monitoring since 5.2.2021!
This post may be old (if you're here from Google), so just go here to get currently active coupons (and price alerts :)) for Drillpro 600mm Woodworking Line Scriber T-type: https://couponsfromchina.com/drillpro-600mm-woodworking-line-scriber-t-type-coupon-price/
I hope it's useful for you!
Pretty good deal with big price discount.
You can also check other channels:
2021.09.26 08:50 merrtttd Can invertebrates be drug via transdermal?
Is it fucked up to do that to invertebrates?
Obviously never vertebrates!
Is it possible?
Do they have more aminergic receptors other than octopaminergic dopaminergic and noradrenergic?
If u put a concentrated solution of an active chemical in a 1ml syringe, could you drip this on the soft sole of a slug for example to administer?
Would this depend on the active chemical compositions ability to pass through and would it depend on the invertebrates skin/cells type?
Example: slugs are squishy cockroaches hard
submitted by merrtttd to BabyBees [link] [comments]